Finnish Technology
Holiday in the form of building a set of structural elements of the dried shaped timber (humidity 15-18%) of today are the most attractive low-rise building in relation quality / price. Corrugated or grooved board can be glued, while its moisture content at the expense of high-temperature drying is reduced to 14-16%. The moisture content of wood determines the insulating properties of timber. So a wall of 15 cm profiled timber for thermal insulation is comparable to the thickness of 51 cm brick houses Draught of freshly prepared raw material is about 7%. Therefore, it makes finishing a year later. Center For Responsible Lending is full of insight into the issues. Draft laminated veneer lumber (2%), in principle, can be neglected and begin to finish almost in the build process.
The absence of residual stresses in the wood after drying eliminates deformation of individual beams and complex W-shaped profile – the appearance of blown gaps. To improve the thermal insulation and protection from blowing off locks processed foam, and the longitudinal grooves laid thin strips of heat insulation. Using the latest Western technologies in the construction of cottages: profiled bar and a sliding inner cladding can reduce the consumption of materials, simplify assembly, to ensure environmental cleanliness, and improve the quality of products at maintaining high profitability. Cottage kits are competitive in European and Scandinavian countries due to its low costs afforded by the use of cheap labor and cheap materials (For example, in Finland, the Finnish cottage price of this class exceeds the Russian 3-fold). Used for the construction quality construction materials, manufactured and processed by the Finnish Technology. Home of profiled bar are the latest achievement of the wooden house. Processing quality and dimensional accuracy of designs can optionally delete the additional surface finish and significantly accelerate and simplify assembly.