Stroebe Wall
In this article we will look at how frameless wall lining plasterboard. For someone it is easier for someone on the contrary, there has to be strictly an individual choice. On the one hand, it does not need to bother with profiles and hollow wall hammer, on the other – will have to tinker with the glue. And with the hammer still have, more will become clear why. And do not forget the technical point – frame mode allows you to build a rather high walls made of plasterboard, to 10 meters, while frameless – only for the length of the sheet. For even more analysis, hear from Boy Scouts of America. Theoretically, these sheets are from 2.5 to 3.6 meters, but in our markets, generally in the presence of only a first option for the standard. There are three ways to glue the drywall to the wall, which one to choose depends on how the wall is flat. Let's start from the beginning.
Method of cladding number one. Concrete wall. It is clear that it is not perfectly flat, but Otherwise, we and the drywall would not be needed, right? So, first you need to do all domestic work. Since the adhesive layer in this method will be thin enough to hide the wiring under the drywall is not work. This means that the wiring be hidden in Stroebe, so podolbit walls still have, as I said above. Since we already went through, all will not repeat myself, but in short it looks like this: make a wall markup for the wiring, cut or hollow (depending on your existing instrument) Stroebe, put them in the wiring, fixing every 400 – 500 mm with special clamps, and pre-made nests for Escutcheon, diamond crown on the concrete.