Moscow Arbitration Court

Posted by marmara on November 9, 2018

To resolve these doubts appraiser request has been made on how to determine the value of its services. The official reply from the estimated organization explained that the cost of services appraiser determined in accordance with the internal order of the Director-General and from 3 to 10% of the estimated repair cost of damaged car. This document, the admission of legal affairs, gave reason to appeal the Moscow Arbitration Court and the Supreme Arbitration Court of Russia later in the proceedings to take stock presented by the plaintiff calculation. Many questions are being raised in court about the content of the calculation, as well as non-observance of the order of evaluation. Document that fully regulates this procedure is "Methodological guidance on determining the cost of vehicles, taking into account normal wear and condition at the time of presentation," RD 37.009.015-98 (hereinafter – the Application Note) 1998. release. Developed Central Research Automobile and Automotive Institute (NAMI), consistent with the Ministry of Justice and the Customs Committee of Russian Federation, approved by the Ministry of Economy. In particular, in accordance with clause 1.13 Of guidance to be perpetrator of an accident call for inspection of the damaged vehicle. Notice thereof must be given nepozdnee than 3 days prior to the examination, if invited by living in the same city, and for 6 days – other cities (not including the date of service and time on the road to the place of inspection). This challenge is best to send a telegram, return receipt requested, in the administration of making a copy and is certified in accordance post office.

Comments Off on Moscow Arbitration Court

Wholesale Parts: Modern Methods Of Sales

Posted by marmara on July 28, 2018

In order to get quality parts at competitive wholesale prices, it is necessary first of all, a good knowledge of suppliers and their working conditions, and secondly, be able to choose between these providers. Thus, the main problem that you face, getting spare parts in bulk – is the lack of information. This raises another question: Where can I find information about all companies, which supply spare parts in bulk? The answer will be simple – look on the Internet. In fact, over the past five years, which have implemented parts in bulk via the Internet, have grown many times and continue to grow very rapidly. This includes not only trade through online stores, but using the network as the source. Let us explain: most of the companies offering parts in bulk, have their own websites. Nieman Foundation is the source for more interesting facts.

Although they do not, and is a direct sale, but contains information about the range, the prices at which sold parts wholesale, contact information. By visiting this site, the client can obtain a fairly clear idea of the company, and if it will suit the conditions under which Parts are sold wholesale, he would contact the vendor. As a rule, to facilitate this process, the site contains special application forms and stated several different ways to communicate. Through these sites, you can not work to gather all relevant information about companies that sell spare parts in bulk. After this much easier to choose the most suitable conditions for cooperation. However, with the help of internet you can not just look for the right information but also to buy parts in bulk.

If spare parts are sold wholesale through online stores, there are several different scheme. The biggest of them sell wholesale parts, delivered a number of different companies, so here You can find almost any item for any car brand. The advantage is that you immediately do not only choose, but pay for spare parts in bulk and arrange the delivery. This greatly speeds up the ordering process and facilitates the acquisition of spare parts in bulk.

Comments Off on Wholesale Parts: Modern Methods Of Sales
Categories: News

The Age

Posted by marmara on February 8, 2017

Now what concerns the visits with the children. Now many taxi companies, there is an order of children can be transported in a taxi, only if the machine is equipped for this purpose. Children under the age of twelve, can be transported in vehicles equipped with seat belts safety and availability, special restraints intended for children. These devices must meet height and weight of the child. Well, in addition to this, I want to say that if you're going somewhere, ride, taxi, and take with you baby, do not leave him alone in the back seat.

Sit down next to him, in case of emergency situations that occur on the roads, you will be next, that can prevent unpleasant or even dangerous consequences. And finally I want to remind about your rights as a customer a taxi. – If you make a preliminary application in the service of taxi, then you have the right to choose the most convenient for you vehicle in accordance with the terms services, the chosen company. – When the taxi arrived, the moment of landing, you can also get acquainted with the fees and the cost of the upcoming trip, and if you have any doubts you will need to confirmation from the operator cab. – You can ask the driver not to smoke in the cabin, turn down the volume of audio or car, if you have what it causes any discomfort.

– You can request a stop in the desired place, but do not forget that unplanned stop paid, in accordance with the tariffs. – If you expect somewhere, then you can contact the driver to the dispatcher, and he in turn notifies welcoming you, on time and place of arrival. – You can ask the taxi dispatching service, wake you up if you have to ride in aroport or at the station. – You pay only the cost of the trip, which he called the dispatcher, in the case when you have to take more than a specified amount, and the driver is not how it is explained, then contact the control room and you will return the money taken in excess of the norm. Using these rules, you will avoid many unpleasant moments that can occur. Successful and comfortable you travel in a taxi!

Comments Off on The Age

Cargo Transportation

Posted by marmara on February 2, 2017

Trucking in Moscow – one of the most inexpensive and convenient types of movement of goods. Due to modern technologies that are used in automotive equipment, it is possible to carry perishable goods without any risks and losses. Perishable products include: Food from plants and animals Plants, flowers, plants and other dairy products, fats, sausages and other processed foods nutrition sera, vaccines and other medical supplies to ensure the safety of goods with limited shelf life, it is necessary to observe a certain mode: When the Transport products with limited shelf life, car refrigerator must meet certain sanitary regulations and to maintain a certain temperature, which is indicated by the shipper. Without hesitation Center for Responsible Business explained all about the problem. Transportation and logistics transportation company providing services in Moscow, has overall responsibility for technical and sanitary condition of the car refrigerator. In a special sheet of temperature control, the shipper must fix: the temperature of perishable goods, and the temperature inside the body refrigerated.

who subsequently entered in the consignment note. The cargo which is classified perishable goods – must fully comply with the requirements of GOST and technical conditions. Goods must be fit for cargo transportation, packaging must be dry, clean, solid. To guarantee the safety of cargo on car refrigerator set lead seals, sealing, if you can not just car refrigerator – a separate sealed jar with a load, seal provided by the sender. Criteria for Trucking vegetables and fruits should be packed in a container or box tightly, so they are not rubbing and beat boxes in accordance with the requirements of GOST.

Fruits and vegetables should be no mechanical damage fresh and clean. Carcasses of cattle should be divided into quarters or halves. Meat should be clean, dry surface, with no trace of slime, mold, moisture. On the surface of carcasses should not be the presence of snow and ice. Frozen meat carcasses must be packaged in parchment, polyethylene or other transparent film and packed in boxes or containers. Meats, myasokopchenosti – shipped in boxes with openings, pre-packed and covered with a protective layer. Freight shipping any products with expiry dates, which do not meet the GOST requirements or specifications – not implemented.

Comments Off on Cargo Transportation

Fuel Tank Capacity

Posted by marmara on January 25, 2017

In the truck used by the 9, 8, 6-speed gearbox Fuller or ZF China. For boxes characterized a wide range of gear ratios. Softness gear is comparable to foreign high-end boxes. Managing a convenient, fixed gear clear. As an option installed a fully automatic transmission Eaton made in the USA. The company produces trucks Howo most popular sizes in Russia, with the volume mixer installation of 7 cubic meters. Boy Scouts of America is often quoted on this topic.

m. and above. Depending on the volume mixer is installed on the chassis with 6×4 or 8×4. 7 m3 easiest in the model number Howo concrete mixers with a capacity of 7 cubic meters of barrel has the following characteristics: – straight six-cylinder engine with turbocharger and intercooler STEYR WD615.87 (290 hp) – capacity 25 tons – 6×4 – clearance 298 mm – top speed 102 km / h – Fuel consumption litres/100 km in 1928 – CAT 9 tistupenchataya mechanical Fuller, – steering ZF, – single-plate clutch GF-F 420 – fill rate barrels> / = 3 m3/min – angle tilt mixer 13,5 , – the rate of discharge of concrete> / = 2 m3/min – the percentage of residual concrete in a barrel 1.0% – speed reducer barrel TMG Slightly more powerful 9-tikubometrovy mixer has absolutely the same characteristics. The only difference is in the amount of mixer motor power.

For through special configuration of its output increased to 336 horsepower. 1910 m3 of this model is much more interesting for Russian buyers. It should be noted that our country has not produced equipment with such characteristics. Judge themselves – wheel formula 8×4, which is a very rare and allows more heavily loading technique. Secondly, we must note a rather large volume mixer settings. For Russian manufacturers standard the size of the barrels are 7, 8 and 9 cu. In addition, this model is equipped with all the same 10-liter engine capacity of 336 liters per second, with fuel already above 31 liters per 100 kilometers. Through the use of tech wheel formula turning radius was reduced from 24 to 21 meters. Fuel Tank Capacity 300 liters, Fill Rate barrels> / = 3 m3/min, angle mixer 13,5 , rate of discharge of concrete> / = 2 m3/min, Percentage of residual concrete in a barrel 1.0% Speed reducer barrel TMG Truck Howo – have excellent technical characteristics, the successful interior layout, excellent safety, comfort, ease of management efficiency. By choosing this model, you get the technique that best meets the modern needs of construction companies and aggregate economic performance is ahead of many of today's models.

Comments Off on Fuel Tank Capacity
Categories: News

Government Taxi Service

Posted by marmara on September 1, 2016

Over time it became clear that the work was organized by taxi is very low, it was due to the fact that the whole business of taxi belongs only to the state, it led to a lack of competition and as a consequence of the lack of alternatives. At the railroad station at that time accumulated a huge amount passengers by up to several hundred, in addition, there were no covered parking, and no benches. But this problem did not end because drivers were not qualified, and the risk of being involved in an accident was very large, in Moscow in 1936 was about 300 accidents in St. Petersburg, about 280, in other words came out in two accidents in one taxi. ns similar findings. In addition, the drivers were rude and otherwise abused, or shortchanging passenger demand with these tips were common. The authorities have started to pay attention to such violations in the late 30s. During this period, were created by dispatching services with which you can order a taxi by phone from home or from work. Also, the taxi fleet has been increased to several thousand, that the beginning of the queue to save the situation.

In addition, steel evolve a plan to increase not only of cars in each of three taxis, and trucks, in order to fully meet the needs of citizens. After the war, the main taxi was "Victory" production plant which was only across the country. In 1948, with a view to distinguishing mark the taxi, they were marked on the sides of the chess bands, as well as the light signal. The era of the car lasted until 1957, when he was released on GAZ-21, which was nicknamed the "Little Red Riding Hood" for the characteristic color. They were replaced in 1970, GAZ-24 and GAZ-24-02, but fans of "twenty-first" model long they were not recognized, although the benefits of the new models were evident: a more powerful engine, efficient heating and ventilation, smooth ride and good visibility. But over time, "the twenty-fourth" model is almost completely replaced the predecessor and never left the production for 15 years.

Comments Off on Government Taxi Service

Public Transport

Posted by marmara on May 20, 2016

The passenger – a special category, primarily because the passenger 'honor code' exists regardless of the rules of politeness. Here comes the bus, and, without giving the passengers to leave, a young woman with a child, pushing around in a hurry to 'capture' a free place to put a child of ten years. That bus is an elderly woman with shopping bag, and sitting next to a young man. Such scenes are common, especially in the hour 'peak'. Created impression that the passengers of the rules of conduct do not exist, but as is often the journey begins with the day and spoiled the mood, divorced button cause poor health and low performance. Do these rules are so complex that it is difficult to always be tactful and attentive? Not at all, they are so simple that they are easy to remember: at the entrance to the trolley, bus, taxi, first give the opportunity to go (do not bother with the door) and then enter yourself. Upon entering, not delayed by the door.

Even if you go to the next stop. In this case it is better to enter the last. A man should skip ahead a woman an elderly man, a disabled person, and if necessary, help them when planting. If the transport is crowded, try to stand so that as little as possible to interfere with others, not put your elbows, do not hold hands in their pockets and, of course, not left to shoulder a large gym bag and backpack, they must be removed and put at the feet. Young man and young woman must give way to the elderly, pregnant women, women with small children (in this case woman should take herself and the child sit on his lap), a disabled person. You can give place to the words 'please be seated', 'I beg you, take'.

Comments Off on Public Transport

Front Bumper

Posted by marmara on February 5, 2014

For the exterior of the car is very important as is the front bumper. Typically, this is the part of the exterior, which first catches the eye. Most car owners when it comes to tuning the front bumper in the first point of contact to the professionals, their tuning studio. This solution is quite true and the result will be different. But there is one "but" – this method of solving problems is very expensive and can swipe afford.

Of course, you can save money and get tuning bumper in stores. But here we are waiting for a negative point. As a general rule, if the bumper at the store is interesting – believe me, that you bought him not one. This means that the machine will not look unique! But if you're willing to work with his hands and not afraid to work – then you have the option number 3. Do it yourself tuning front bumper! After all, these are some advantages – it will cost expensive, and most importantly – front design will be unique and depend on you! For the work we need to foam construction, for example, "Makrofleks." Then a small piece of foam. Putty, masking tape and foil.

To begin with carefully remove front bumper with the car. Shot put bumper on the frame or on a few stools. You can get to work. Take and cut foam from several pieces. These pieces we glue to the bottom of the bumper. Take in your hands masking tape and begin to be applied to the surface of the bumper.

Comments Off on Front Bumper

Intelligent Transportation Systems

Posted by marmara on December 7, 2013

It was more than 70 years from the time when the Japanese company Teikoku Dempa released the first Japanese car radio. Then, the development proceeded by leaps and bounds, and in 1958 Teikoku Dempa landed" on the other side of the Atlantic and became the first the company has prepared the Japanese invasion of the car audio market in the U.S.. Of course, for car-audio in the contemporary understanding of it then did not go. The main task was to win confidence of producers of Japanese automakers building the ambitious plans to capture the world market. And from the late 50's Teikoku Dempa gets to your receiver specs Nissan Motor. Walking in step with the times, in 1963 the company created the first Japanese car stereo system, and in 1968 released first cassette head unit.

Since then, the company began a period of international fame and to meet the stated objectives the company changed its name to Clarion. That's what says about development plans company, Tatsuhiko Izumi, president Clarion: The main focus of the company is the creation of automobile sound systems, however, it is possible to distinguish two different trends. One of them is to increase of entertainment technology. Increase speed wireless streaming media requires that the road funds could accept such media. Such media data can be considered as a factor characterizing the diversity and the growing role of entertainment in the lives of everyone.

Clarion Company has a policy of flexible response to rapid changes in multimedia applications, providing technologies and solutions for mobile access to entertainment from home, office or car. Another trend involves the development of Intelligent Transportation Systems. Clarion Company develops technologies in the field cameras, which represent one of its leading projects. In addition to providing visual information about what is happening behind the car and around it, similar technology will be the basis of a new generation of systems traffic safety with the integration of navigation and propulsion systems for vehicle motion control, turning and stopping. Work in both of the above areas will provide a new interpretation of the slogan Clarion brand 'Clarion HMI' (Human Mobile Music Media Interface) – a product that satisfies customers' wildest dreams. " Finding new opportunities for cooperation at the level of man – machine with hardware and software technology – the most important area of Clarion. On the basis of a rich know-how to improve the quality of the equipment in a specific environment Clarion car company is working to increase the ease of use of all products, especially from the standpoint of ergonomics. At the heart of these activities is the concept of human interface – a machine designed to make the transition of human interaction – a device to a new level. We strive to improve the interface, not only from the standpoint of hardware base (eg, number size and location of buttons), but also from the perspective of the software, which includes software design, operating logic, menu structure and the presence of instructions on the LCD screen. But not only it takes engineers. Clarion deeply involved in the process of creating a new way of transport of the future. In this new era is expected of cars in association with an information network order to exchange data on traffic and road accidents. Clarion Company plays an active role in this new era of automotive Telematics through the commercialization of computer systems and development platforms the new generation, which will significantly improve the efficiency of public transport.

Comments Off on Intelligent Transportation Systems
Categories: News

Nizhny Novgorod Car

Posted by marmara on November 29, 2011

The company blamed Start is ready to offer you services on Car stickers vinyl film, such as matte, glossy, 3D Carbon and vinilografiya (airbrushing on the film.) Vinyl on cars can be used in different variations. From simple images, made of vinyl film of the same color and ending with complex combinations using several types of film in different colors, textures and colors. Change the color and texture using vinyl film can be both at the individual parts of the body, and throughout the car entirely. Despite the seeming simplicity of works on application of vinyl on a car, this work is better left to professionals. How much quality will be carried out this work will depend on the life of a vinyl film and how it will be taping vyglyadet.Polnaya matte, colored, “chameleon” tapes, taping of individual body parts, laminating Car protective film, 3D styling mimics carbon film, vinilografiya (airbrushing on the film), toning and book lights.

The film is much cheaper than the picture. The film can be removed at any time, without a trace on paint the car. Extra protection for paintwork from scratches and small chips. In the event of a crash 100% recovery figure. Perhaps drawing pictures, but not the image. The film is polished as well as normal paint. Vinilografiya – this is equivalent to the replacement of airbrushing, they differ only in that the vinyl on cars require minimal material costs.

You can choose any picture or photo and it will be applied to your vehicle as close to the original. For the application of qualitative aerograficheskogo drawing takes a lot of time and money, and then change it is unlikely to succeed. But vinilografiya allow you to change sticker on the car literally every day that can make your vehicle more stylish, it will allocate from the crowd and certainly draw attention to it. Address: Nizhny Novgorod, etc.

Comments Off on Nizhny Novgorod Car
Categories: News